HOTLINE: 0908.851.351

DANH MỤC SẢN PHẨM

HỖ TRỢ KHÁCH HÀNG

Ms.Hà

hanm@std.net.vn
090.943.1978

Mr.Trung

trunglv@std.net.vn
090.885.1351

HỖ TRỢ KỸ THUẬT

Mr.Xá

support@std.net.vn
093.473.0901

Professional Series (1P/1P) - Tower

Mã sản phẩm :

Nhóm - ONLINE 1PHA

Liên hệ: 090.885.1351

Model		PRO901 (S/L/SI/LI)	PRO902 (S/L/SI/LI)	PRO903 (S/L/SI/LI)	PRO906 (S/L/SI/LI)
Capacity	Volt-Amp	1000 VA	2000 VA	3000 VA	6000 VA
Capacity	Watt	800 W	1600 W	2400 W	4200 W
Phase		Single Phase In / Single Phase Out
Isolation Transformer		Optional
Input
Input AC Voltage		208/220/230/240VAC or 110/115/120/127VAC			208/220/230/240VAC
Voltage Range	Low Line Transfer	160/140/120/110VAC ±5% or 80/70/60/50VAC ±5% #1			175/150/130/110VAC ±5% #1
	Low Line Comeback	168/148/128/118VAC ±5% or 84/74/64/54VAC ±5% #1			183/158/138/118VAC ±5% #1
	Low Line Comeback (Auto Restart)	168VAC ±5% or 84VAC ±5% (80%~ 100% Load) 148VAC ±5% or 74VAC ±5% (0%~ 80% Load)			180VAC ±5% (80%~ 100% Load) 155VAC ±5% (0%~ 80% Load)
	High Line Transfer	300VAC ±5% or 150VAC ±5%			280VAC ±5%
	High Line Comeback	290VAC ±5% or 145VAC ±5%			270VAC ±5%
Frequency Range		40~70Hz (Auto Sensing)
Power Factor Correction		≥ 0.98		≥ 0.99	≥ 0.95
Output
Output AC Voltage		208/220/230/240VAC or 110/115/120/127VAC
AC Voltage Regulation (Battery Mde)		±1%		±3%
Frequency Range	Synchronized Range	47~53Hz or 57~63Hz
Frequency Range	Battery Mode	50Hz ±0.25Hz or 60Hz ±0.3Hz
Current Crest Ratio		3:1
Harmonic Distortion	Linear Load	≤3% THD	≤4% THD	≤3% THD
Harmonic Distortion	Non-Linear Load	≤6% THD	≤7% THD	≤6% THD
Transfer Time	AC Mode to Battery Mode	Zero
Transfer Time	Inverter to Bypass	4ms (Typical)
Waveform (Battery Mode)		Pure Sinewave
Power Factor		0.8
Effciency
AC Mode		88.5%	>89.3%	87%	90%
Battery Mode		83.7%	88.2%	85%	85%
Battery
Standard Model	Battery Type	12V9AH			12V10AH
	Numbers	2	4	6	8
	Typical Recharge Time	9 hours recover to 90% capacity
	Charging Current (max.)	1A
	Charging Voltage	27.4VDC ±1%	54.7VDC ±1%	82.1VDC ±1%	109.4VDC ±1%
Long-Run Model	Battery Type	Depending on applications
	Numbers	2	4	6	8
	Charging Current (max.)	1A/5A	1A/2A/4A/8A	4A/8A	4A/8A, 10A (Optional)
	Charging Voltage	27.4VDC ±1%	54.7VDC ±1%	82.1VDC ±1%	109.4VDC±1%
Indicators
LCD Panel		UPS Status, Load Level, Battery Level, Input/Output Voltage, Discharge Timer, Fault Conditions
Alarm
Battery Model		Sounding every 4 seconds
Low Battery		Sounding every seconds
Overload		Sounding twice every seconds
Fault		Continuously sounding
Physical
Standard Model	Dimension (mm) D×W×H	400×146×205M	397×145×220	421×190×318	426×190×318
Standard Model	Net Weight (kgs)	9.3	17.2	28.8	35.3
Long-Run Model	Dimension (mm) D×W×H	400×146×205	397×140×220	421×190×318	426×190×318
Long-Run Model	Net Weight (kgs)	4.8	8.9	13.5	14.3
Environment
Humidity		20-90% Relative Humidity @ 0~40°C (Non-Condensing)
Noise Level		Less than 45dB @ 1 Meter			Less than 55dB @ 1 Meter
Regulations		EN 62040-2:2006, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008
Management
Smart RS232		Support Windows® 2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix and MAC
Package Content		Included Please contact regional sales staff for details.
Warranty		Please refer Service Policy and Warranty.